Using OS 9 prevents this problem.Ĭopy the contents of Install Disk 1 onto a freshly formatted floppy disk. Additionally, formatting a disk in OS X and using it creates additional invisible files, which reduce your practical working space from 1.3MB to 1.1 or even 1MB, which is not suitable. OS X can sometimes corrupt certain Mac OS 9 files, so the author did this work on an iBook G3 900MHz/32VRAM with a USB floppy drive booted into 9.2.2. Your next step is then to mount all 19 floppy disk images. The next problem is that the CD Install cannot fit on floppy disks, so you must take the next step by downloading the Legacy Software Restore Disk. The solution is to install a very basic System 7 install on the hard drive, which can be found here. If you do not, then you will be forced to play the FloppySwappyâ„¢ game, which requires the tedious job of swapping Install Disk 1 and your System 7 boot floppy six to eight times just to mount it on the desktop (a RAM Disk could be a possible boot option, but that only is pragmatic in System 6). The floppy drive route is highly undesirable unless you have an external floppy drive hooked to your SE/30. In order to install 7.5.3, you must have at least System 7.0 on a floppy drive or the hard drive.
However, the author did not have this luxury, and the Installer requires 45MB by itself, which wouldn’t fit on a 40MB hard drive. The next step is download all 19 parts of System 7.5.3 CD Install here and transfer it to the SE/30. The easiest way to do this is using an older Mac that can connect to the Internet and share files using LocalTalk with a LocalTalk network between the two computers.
Ftp server mac os 10.4 mac os x#
System 7.5.5 is the best for this platform for Internet access and is required to connect to Mac OS X computers. We will march along that established route. Part 2: Installing the SoftwareĬommon convention among computers is to install the software before the hardware.
Ftp server mac os 10.4 drivers#
System 7.5.5: AppleShare Client 3.7.4, Chooser v.7.6.1, OpenTransport 1.1.2, OpenTransport 1.3, Network Software Selector, and your Ethernet card drivers if required. System 6.0.8: AppleShare WorkStation v.3.5, MacTCP v.2.0.6, Network Software Installer v.1.4.5, and Ethernet card drivers if required. Part 1: Basic Requirements 1.1 HardwareĪ Macintosh SE/30 in good working order, with a hard drive, working floppy drive, preferably 32MB of memory for a 12-20MB RAM Disk, at least five floppy disks in good order, another Mac that can write floppy disks (or an external USB floppy drive), Ethernet cross-over cable, Ethernet standard cable, and (preferably) Ethernet RJ45 (8P8C type) network 030 PDS expansion card, a large tolerance for discomfort, emotional stamina, and a partridge in a pear tree. Although this guide will assume you have the same setup as the author, there are variations possible, so consider this approach to be just one way of doing it. This guide will be an attempt to detail the steps necessary to connect an SE/30 for file sharing and Internet connection establishment. The Definitive Guide to Connecting your SE/30
0 kommentar(er)
